Guangzhou JXPACK Technology Co., LTD. info@jxpack.com 86--18027219652
Quick answer: PETG wins on shelf appearance, PP wins on chemical resistance and cost, and PET wins on the balance between clarity and price. No single material is best for every cream; the right call depends on the formula, the price point and how the jar should look on shelf. That is the honest answer after 15 years of molding jars, and the rest of this guide explains the three cases where each one is the right call. If you only remember one line, make it this: choose by the formula first, then by the brand position, then by the budget. Buyers who reverse that order usually pay for a packaging change after stability testing, which costs far more than choosing carefully at the start.
The material decides three things you cannot fix later with printing or a label: how the formula behaves over time, how the jar reads in a customer's hand, and what you pay per unit once minimums and decoration are counted. In our factory we see the same avoidable failures repeat. A cream goes cloudy after six weeks on a warm shelf because the resin was wrong for the oil load. A premium serum looks like a value product because the buyer saved a few cents on the wall. A lid strips at the thread because nobody tested the closure with the filled formula. All three problems are decided at the material stage. Decoration cannot rescue a wrong choice, so this is the decision worth spending time on.
Choose PET when the formula is a standard moisturizer and you want the best clarity per dollar, or when the same jar will double as a storage container. Thick-wall PET handles cream well; thin-wall PET handles balms and general storage. PET is the workhorse of our range. Thick-wall versions in 30g to 100g are the standard face cream and moisturizer jar: they show the fill level, feel solid, and price well at volume. Thin-wall versions in larger sizes suit balms, scrubs and general storage, and for that food-contact storage use we can supply the relevant documentation. The limit is chemical resistance. High oil loads, strong actives and pure essential oils stress PET over time, causing clouding or cracking. For an ordinary water-in-oil or oil-in-water cream, PET remains the most economical starting point.
Choose PP when the formula is active, acidic or oil-heavy, or when unit cost at scale matters more than a see-through wall. It is the most forgiving plastic we mold and the cheapest at volume, with a soft milky finish. PP is slightly translucent with a soft, milky finish, and that is a feature rather than a flaw. It is the most forgiving of the three plastics with difficult formulas, which is why it is our default for body butter, masks and the 200g to 1000g spa and refill sizes. It resists cracking and stress-whitening better than the clearer plastics and is the cheapest of the three at volume. If the brand wants a frosted, matte or clinical look, PP delivers it without an extra finishing step. The trade-off is optical: it will never give the glass-like clarity a premium cream expects.
Choose PETG when the jar itself has to signal quality, typically a 10g to 50g eye cream or premium face cream where the customer expects a glass-like look. It costs more per unit but ships lighter and breaks far less often than glass. PETG has a clarity close to glass with more weight and depth than PET, and it takes hot-stamping and printing beautifully. That is why we reserve it for high-end cream lines and rarely use it for storage; the value is in the presentation and would be wasted on a bulk refill jar. It costs more per unit than PET or PP, but it ships lighter and breaks far less often than glass, which matters on cross-border orders. Think of it as the middle path: the shelf presence of glass, with the practicality of plastic. For a clean-beauty or gifting line, it is usually the strongest choice.
Here is the full comparison on the six criteria that decide a cream jar order: clarity, chemical resistance, formula fit, typical sizes, unit cost and MOQ. All rows reflect our own-factory range, so the minimums are identical across all three materials.
| Criterion | PET | PP | PETG |
|---|---|---|---|
| Clarity | Clear, good | Translucent, milky | High, glass-like |
| Chemical resistance | Good for standard creams | Excellent, best of the three | Good |
| Oily or active formulas | Not recommended | Recommended | Acceptable for premium creams |
| Typical cream sizes | 30g–100g, plus storage sizes | 50g–1000g | 10g–50g |
| Relative unit cost | Low | Lowest | Medium |
| MOQ (stock / custom) | 1,000 / 5,000 | 1,000 / 5,000 | 1,000 / 5,000 |
One rule from the factory floor: PETG for the look, PP for the formula, PET for the balance. When two criteria pull in different directions, decide which one your customer actually notices and let that one win.
![]()
Use this three-step rule: screen the formula for aggressive ingredients, set the brand position, then confirm the minimums and budget. It is the sequence we use with new buyers, and it keeps the material decision separate from the decoration work. Each step has a clear output before you move to the next.
Then run a filled-product stability test before you commit to volume. A jar that looks perfect on day one can fail in week six when the formula, the closure and a warm warehouse meet.
Yes, and most established brands do. Different SKUs have different jobs, so a single material across the whole line usually means compromise somewhere. A tiered range matches each formula and price point to the right pack every time. A sensible ladder looks like this: an entry-tier moisturizer in PET, an active treatment in PP, and the flagship cream in PETG. Each SKU then carries packaging that matches its claim and price point. The mistake to avoid is a flagship formula in a jar that looks like the value SKU, because customers read the pack before they read the ingredient list. Mixing materials adds a little complexity to purchasing, but our three materials share the same MOQ tiers and decoration methods, so it does not multiply suppliers or minimums.
Our cream jars start at 1,000 pieces for stock colors and 5,000 for custom color or printing, with the same minimums for PET, PP and PETG. Sizes can be mixed in one order, so a first batch can cover two SKUs without doubling the commitment. That matters more than it sounds. A buyer who can combine a 30g and a 100g SKU in one 1,000-piece trial order tests two products without doubling the commitment. Standard stock ships in 3 to 5 days; a custom run with tooling and quality checks takes roughly 20 to 30 days. Because all three materials are produced in-house, there is no trading margin and no second supplier to wait on. When you compare quotes, ask each supplier for the minimum per material and whether sizes can be combined. That question often changes the real cost more than the unit price does. See our cosmetic cream jar range for current stock options.
All three materials take the same decoration, so switching material does not mean restarting the branding. Spend first on the lid and the logo, and leave custom molds until the SKU is proven. Pantone colors and printing work on PET, PP and PETG alike. You can specify any Pantone color for jar and lid, add a logo by silk-screen or hot-stamping, use labels, and choose a spoon or double-wall lid for a weighted, hygienic feel. A double-wall lid is the cheapest way to make a lighter jar feel expensive. Custom molds start at 5,000 pieces and a color sample typically takes 7 to 10 days, with the sample cost credited against the first order. Order one custom-color sample before a full run; the jar in your hand tells you more than a rendered mock-up. For the wider plastic range, see our PET plastic jar options.
![]()
Ask for SGS testing, CE and ISO 9001 systems, and FDA-aligned material handling, then ask what the factory actually tests on each batch. Certificates on the wall are a starting point; batch leak and seal tests are what keep a shipment clean. Documentation matters, but batch records matter more. JXPACK has 15 years of experience and runs a 50,000 m² factory with more than 200 injection-molding machines, 100 blow-molding machines and 50 printing, hot-stamping and labeling lines, producing up to 20 million sets per month. Every lot passes incoming-material, in-process and final inspection before shipment. We support third-party inspection and provide the documentation your market requires. Food-contact documentation applies to PET and PP storage jars; cream jars are specified on cosmetic-grade resin. For the buyer-side version of these checks, read our guide on choosing a lotion bottle manufacturer.
No single material wins on every criterion. PETG has the best clarity for high-end creams. PP has the strongest chemical resistance and the lowest cost for active or oil-heavy formulas. PET offers the best clarity-to-price balance and covers both cream and storage SKUs. Choose by formula, then brand position, then budget.
PETG is not a universal upgrade. It is clearer and feels heavier, which suits a premium cream, but it costs more and is not intended for storage. PET is cheaper, still clear, and covers both cream and storage. Use PETG when shelf appearance carries the sale.
No. High oil loads and pure essential oils can stress PET and cause clouding or cracking. Use PP for oily or active formulas. For pure essential oils, glass is the correct pack because oil can react with plastic.
All three materials follow the same own-factory tiers: 1,000 pieces for stock colors and 5,000 for custom color or printing. You can mix sizes in one order. Stock ships in 3 to 5 days; custom runs take roughly 20 to 30 days including tooling and QC.
Food-contact documentation applies to PET and PP storage jars. Cream jars are specified on cosmetic-grade resin. Programs are built around SGS testing, CE and ISO 9001 systems, and FDA-aligned material handling. Request the certificates your target market requires at the quote stage.
If you remember one thing, let it be this: PETG for the look, PP for the formula, PET for the balance. As a cream jar manufacturer with 15 years behind us, JXPACK makes all three in our own factory, from 10g to 1000g, with a 1,000-piece stock minimum, a 5,000-piece custom minimum, and full OEM and private-label support. Tell us the formula and the price point you are targeting and we will recommend the material before you commit to a mold.